Buffalo LS-WXL/LS-QVL等LS系列新手改机攻略,固件1.62以下，Raid均可

胡杨 发表于 2012-10-15 20:23
{
    "alt-speed-down": 50,
    "alt-speed-enabled": false,

"incomplete-dir": "\/root\/Downloads",改成"incomplete-dir": "/mnt/disk1/share/Downloads/Temp"（下载临时文件保存路径（注意大小写））
看这个配置应该是改成了，配置自动启动的脚本了吗？配完了要重启一下，再不行的话把你改机执行命令的结果贴上来看看，

Wacker 发表于 2012-10-15 22:06
"incomplete-dir": "\/root\/Downloads",改成"incomplete-dir": "/mnt/disk1/share/Downloads/Temp"（下 ...

要注意是否要改 disk1为array1

过着忙碌日子 发表于 2012-10-15 22:25
要注意是否要改 disk1为array1

谢谢你的回复，我现在正在重新改机，为了把过程贴上来，另外我想问一下，我不想raid，但又是双盘的nas，那个disk1怎么改呢？

胡杨 发表于 2012-10-15 22:30
谢谢你的回复，我现在正在重新改机，为了把过程贴上来，另外我想问一下，我不想raid，但又是双盘的nas， ...

disk1 or disk2
一般都放1位

楼主请帮忙看看，我刚设好了，但9091连不上，  谢谢
{
    "alt-speed-down": 50,
    "alt-speed-enabled": false,
    "alt-speed-time-begin": 540,
    "alt-speed-time-day": 127,
    "alt-speed-time-enabled": false,
    "alt-speed-time-end": 1020,
    "alt-speed-up": 20,
    "bind-address-ipv4": "0.0.0.0",
    "bind-address-ipv6": "::",
    "blocklist-enabled": false,
    "blocklist-url": "http://www.example.com/blocklist",
    "cache-size-mb": 4,
    "dht-enabled": true,
    "download-dir": "/mnt/array1/share/Downloads",
    "download-queue-enabled": true,
    "download-queue-size": 5,
    "encryption": 1,
    "idle-seeding-limit": 30,
    "idle-seeding-limit-enabled": false,
    "incomplete-dir": "/mnt/array1/share/Downloads/Temp",
    "incomplete-dir-enabled": false,
    "lpd-enabled": false,
    "message-level": 2,
    "peer-congestion-algorithm": "",
    "peer-limit-global": 240,
    "peer-limit-per-torrent": 60,
    "peer-port": 51413,
    "peer-port-random-high": 65535,
    "peer-port-random-low": 49152,
    "peer-port-random-on-start": false,
    "peer-socket-tos": "default",
    "pex-enabled": false,
    "port-forwarding-enabled": true,
    "preallocation": 1,
    "prefetch-enabled": 1,
    "queue-stalled-enabled": true,
    "queue-stalled-minutes": 30,
    "ratio-limit": 2,
    "ratio-limit-enabled": false,
    "rename-partial-files": true,
    "rpc-authentication-required": false,
    "rpc-bind-address": "0.0.0.0",
    "rpc-enabled": true,
    "rpc-password": "{1a16f5f0fbd654513ea3465deb04d119f63da3daBk6MO2QG",
    "rpc-port": 9091,
    "rpc-url": "/transmission/",
    "rpc-username": "",
    "rpc-whitelist": "*.*.*.*",
    "rpc-whitelist-enabled": true,
    "scrape-paused-torrents-enabled": true,
    "script-torrent-done-enabled": false,
    "script-torrent-done-filename": "",
    "seed-queue-enabled": false,
    "seed-queue-size": 10,
    "speed-limit-down": 100,
    "speed-limit-down-enabled": false,
    "speed-limit-up": 100,
    "speed-limit-up-enabled": false,
    "start-added-torrents": true,
    "trash-original-torrent-files": false,
    "umask": 18,
    "upload-slots-per-torrent": 14,
    "utp-enabled": true
}

请问我第一步改密码就报错

关防火墙再试

过着忙碌日子 发表于 2012-10-15 22:46
楼主请帮忙看看，我刚设好了，但9091连不上，  谢谢
{
    "alt-speed-down": 50,

这个配置应该没问题，你启动pt的进程了吗，用transmission-daemon -f看看，虽然我不知道-f参数干嘛用的，但确实能启动，呵呵

Wacker 发表于 2012-10-16 08:58
这个配置应该没问题，你启动pt的进程了吗，用transmission-daemon -f看看，虽然我不知道-f参数干嘛用的， ...

已启动啊，但不行

过着忙碌日子 发表于 2012-10-16 10:41
已启动啊，但不行

这么说我也不知道原因啊，把你的执行结果贴上来吧

回复@njshuai:什么错误啊，贴上来看看

来自 与火共舞跳龙门 的新浪微博

run transmission-daemon -f後一直停在" DTH Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
不知道是不是这问题影响所有9091开不到?

过着忙碌日子 发表于 2012-10-16 19:50
run transmission-daemon -f後一直停在" DTH Attempting bootstrap from dht.transmissionbt.com (tr-dht.c ...

为什么是run transmission-daemon -f  应该是transmission-daemon -f

安装Optware。
请问怎么办？


-2012-10-16 20:15:13--  http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
Resolving ipkg.nslu2-linux.org... failed: Name or service not known.
wget: unable to resolve host address `ipkg.nslu2-linux.org'

pt880 发表于 2012-10-16 20:03
为什么是run transmission-daemon -f  应该是transmission-daemon -f

是transmission-daemon -f啊

root@LS-WVL298:~# transmission-daemon -f
[19:56:25.295] Transmission 2.61 (13407) started (session.c:720)
[19:56:25.296] RPC Server Adding address to whitelist: *.*.*.* (rpc-server.c:803                                      )
[19:56:25.296] RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/tr                                      ansmission/ (rpc-server.c:997)
[19:56:25.296] RPC Server Whitelist enabled (rpc-server.c:1001)
[19:56:25.296] UDP Failed to set receive buffer: requested 4194304, got 327680 (                                      tr-udp.c:77)
[19:56:25.296] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sys                                      ctl.conf (tr-udp.c:82)
[19:56:25.296] UDP Failed to set send buffer: requested 1048576, got 327680 (tr-                                      udp.c:88)
[19:56:25.296] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sys                                      ctl.conf (tr-udp.c:93)
[19:56:25.296] DHT Generating new id (tr-dht.c:309)
[19:56:25.296] Using settings from "/root/.config/transmission-daemon" (daemon.c                                      :517)
[19:56:25.296] Saved "/root/.config/transmission-daemon/settings.json" (bencode.                                      c:1731)
[19:56:25.296] Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
[19:56:25.296] Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2)                                       (natpmp.c:72)
[19:56:32.375] Port Forwarding State changed from "Not forwarded" to "Starting" (port-forwarding.c:93)
[19:56:33.385] Port Forwarding State changed from "Starting" to "???" (port-forwarding.c:93)
[19:56:58.635] DHT Attempting bootstrap from dht.transmissionbt.com (tr-dht.c:247)
^C[20:35:34.035] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[20:35:34.035] DHT Not saving nodes, DHT not ready (tr-dht.c:356)
[20:35:34.035] Port Forwarding Stopped (port-forwarding.c:181)
Closing transmission session... done.

wget http://ipkg.nslu2-linux.org/feed ... strap_1.2-7_arm.xsh
这条命令报错
Resolving ipkg.nslu2-linux.org... failed: Name or service not known.
wget: unable to resolve host address `ipkg.nslu2-linux.org'

怎么办？

njshuai 发表于 2012-10-16 21:06
wget http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/lspro-bootstrap_1.2-7_arm.xs ...

没有给nas设置DNS服务器地址吧

过着忙碌日子 发表于 2012-10-16 20:35
是transmission-daemon -f啊

root@LS-WVL298:~# transmission-daemon -f

把 下面一行
"port-forwarding-enabled": true,
改为

"port-forwarding-enabled": false,
把下面一行
"dht-enabled": true,
改为
"dht-enabled": false,

pt880 发表于 2012-10-16 22:03
把 下面一行
"port-forwarding-enabled": true,
改为

改了都是一样啊
root@LS-WVL298:~# transmission-daemon -f
[22:47:22.204] Transmission 2.61 (13407) started (session.c:720)
[22:47:22.204] RPC Server Adding address to whitelist: *.*.*.* (rpc-server.c:803                              )
[22:47:22.204] RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/tr                              ansmission/ (rpc-server.c:997)
[22:47:22.204] RPC Server Whitelist enabled (rpc-server.c:1001)
[22:47:22.205] Port Forwarding Stopped (port-forwarding.c:181)
[22:47:22.205] UDP Failed to set receive buffer: requested 4194304, got 327680 (                              tr-udp.c:77)
[22:47:22.205] UDP Please add the line "net.core.rmem_max = 4194304" to /etc/sys                              ctl.conf (tr-udp.c:82)
[22:47:22.205] UDP Failed to set send buffer: requested 1048576, got 327680 (tr-                              udp.c:88)
[22:47:22.205] UDP Please add the line "net.core.wmem_max = 1048576" to /etc/sys                              ctl.conf (tr-udp.c:93)
[22:47:22.205] Using settings from "/root/.config/transmission-daemon" (daemon.c                              :517)
[22:47:22.205] Saved "/root/.config/transmission-daemon/settings.json" (bencode.                              c:1731)
^C[23:05:40.104] Saved "/root/.config/transmission-daemon/settings.json" (bencode.c:1731)
[23:05:40.104] Port Forwarding Stopped (port-forwarding.c:181)
Closing transmission session... done.

telnet登陆不上，
The remote system refused the connection.