我也是按照教程走下来,nfs部分遭遇:
root@LS-WVL4D4:/# exportfs -rv
exporting *:/mnt/disk1/share
exportfs: can't open /var/lib/nfs/rmtab for reading
exportfs: can't open /var/lib/nfs/xtab for reading
后面就不行了。用WinScp看了,rmtap这个文件好像不存在。
我把第一个命令运行的结果贴出来:
D:\>java -jar acp_commander.jar -t 192.168.10.2 -ip 192.168.10.2 -pw admin12345@ -c "(echo newrootpass;echo newrootpass)
|passwd"
七月 06, 2016 10:39:15 下午 java.util.prefs.WindowsPreferences <init>
WARNING: Could not open/create prefs root node Software\JavaSoft\Prefs at root 0x80000002. Windows RegCreateKeyEx(...) r
eturned error code 5.
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.
WARNING: This is experimental software that might brick your linkstation!
Using random connID value = 9A62328F95F5
Using target: TS3400D866/192.168.10.2
Starting authentication procedure...
Sending Discover packet...
Found: TS3400D866 (/192.168.10.2) TS3400D(YOUZEI) (ID=003230) mac: 74:03:BD:2A:08:66 Firmware= 1.600
Key=2EE3B0A9
Trying to authenticate EnOneCmd... ACP_STATE_OK
Trying to authenticate with admin password... ACP_STATE_OK
>(echo newrootpass;echo newrootpass)|passwd
OK (ACP_STATE_OK)
Changeing IP: ACP_STATE_PASSWORD_ERROR
Please note, that the current support for the change of the IP is currently very rudimentary.
The IP has been set to the given, fixed IP, however DNS and gateway have not been set. Use the WebGUI to make appropriat
e settings.