4458有更新了，update1大家都去更新吧！附更新方法

如题，有更新了，我这打不开更新说明。。。加代理了也没出来，看不到更新了什么，谁看得到贴一下吧，更新方法同以往。就不隐藏了，哈哈
sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
mv /autoupd@te.info1 /autoupd@te.info



简单更新方法，先点击下载，下载完毕后，到计划任务里添加上边的代码，如下图，运行后，然后再到更新页面点更新，就行了。上边代码是两行。如果一次不行，多试几次，运行时，可以多点一下。

楼主这个是什么意思呀
你已经更新了?
还是通过什么办法屏蔽了更新

感谢分享~

searl 发表于 2014-3-26 10:42
楼主这个是什么意思呀
你已经更新了?
还是通过什么办法屏蔽了更新

楼主显然是更新了啊，而且还是黑群晖的更新。高人啊！上面应该是Linux的命令，希望看到有详细教程哈。 ：）

楼主教下怎么更新啊

感谢！！！

坚决支持楼主啊！更新方法简单明了！！顶一个！

顺便问问楼主，日后的更新都可以通过这个方法实现吗？还是要在U盘改两个ID才可以实现？谢谢啦！

有了~控制面板有角标了
更新去

thanks！！支持不隐藏

Version: 4.3-3827 Update 1

(2014/3/18)
Change Log

Fixed a security issue related to OpenSSL (CVE-2013-4353).
Fixed security issues by upgrading PHP to version 5.3.28 (CVE-2013-4073, CVE-2013-6420).
Fixed a security issue to prevent malicious attacks via NTP service (CVE-2013-5211).
Fixed an issue where encrypted shared folders on ext3 volumes could not be mounted.
Fixed an issue where Microsoft IIS (Internet Information Services) servers could not list files in shared folders on the DiskStation via SMB.
Fixed an issue where files could not be listed using command line after SMB signing was enabled.
Fixed an issue where data might not be correctly written to a degraded RAID 5 volume. (Applied to: DS213+, DS413, DS213, DS413j, DS213air, DS213j, DS212, DS212+, DS212j, RS212, RS812, DS112j, DS112, DS112+, RS411, DS411, DS411j, DS411slim, DS211+, DS211, DS211j, DS111, DS410, DS410j, DS210+, DS210j, DS110+, DS110j)
Fixed an issue where shutting down or rebooting the DiskStation would fail when DDoS protection was enabled.
Improved system stability when transferring files under heavy workloads.

回楼主，是有更新了，我的系统好像有点问题，截不下图。

这个帖子还真是及时

好东西谢谢分享

谢谢分享

Then use this guide to update it to the lastest from Synology
4.3 build 3810 v3
===============
1. First check if you're able to download update 3 from the GUI (Control Panel, DSM Update) - Download the update.
- 1a. If not able to download, connect/login with putty/telnet (user: root)
- 1b. Remove /autoupd@te.info (rm /autoupd@te.info)
- 1c. Now try to donwload update 3 from GUI again (Control Panel, DSM Update)
2. Connect/login with putty/telnet and execute these 2 commands:

1. sed 's/flashupdateDeb/flashupdateDeb1/' /autoupd@te.info > /autoupd@te.info1
   
2. mv /autoupd@te.info1 /autoupd@te.info

复制代码

3. Install the update from GUI (Control Panel, DSM Update)

脚本也运行了。更新了多次，还是下图的错误。

上面有步骤，已经更新成功

支持LZ，收藏

sparezgw 发表于 2014-3-26 11:26
Then use this guide to update it to the lastest from Synology
4.3 build 3810 v3
===============

NICE to have the TOTAL solution! Thank you buddy! Where it comes from btw? :P