存储服务器无法启动

Booting 'CentOS (2.6.18-194.17.1.el5)'                                                                                                                                           Linux version 2.6.18-194.17.1.el5 (root@SP1) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Sep 14 09:27:01 EDT 2011                                                                 *                       
Command line: ro root=LABEL=/ mem=0xFFFFFFFF reserve=0x100000000,0xff000000 console=ttyS0,115200n8
BIOS-provided physical RAM map:                                            *                       
BIOS-e820: 0000000000010000 - 000000000009a400 (usable)                   *                       
BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)                 *                       
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)                 *                       
BIOS-e820: 0000000000100000 - 00000000df3e2000 (usable)                   *                       
BIOS-e820: 00000000df3e2000 - 00000000df429000 (ACPI NVS)                 *                       
BIOS-e820: 00000000df429000 - 00000000df431000 (ACPI data)                *                       
BIOS-e820: 00000000df431000 - 00000000df446000 (reserved)                 *                       
BIOS-e820: 00000000df446000 - 00000000df447000 (ACPI NVS)******************                       
BIOS-e820: 00000000df447000 - 00000000df458000 (reserved)ghted.                                   
BIOS-e820: 00000000df458000 - 00000000df45b000 (ACPI NVS)                                         
BIOS-e820: 00000000df45b000 - 00000000df482000 (reserved)guments                                 
BIOS-e820: 00000000df482000 - 00000000df484000 (usable)                                          
BIOS-e820: 00000000df484000 - 00000000df505000 (reserved)                                         
BIOS-e820: 00000000df505000 - 00000000df50f000 (ACPI NVS) seconds.                                
BIOS-e820: 00000000df50f000 - 00000000df536000 (reserved)                                         
BIOS-e820: 00000000df536000 - 00000000df579000 (ACPI NVS)                                         
BIOS-e820: 00000000df579000 - 00000000df800000 (usable)                                          
BIOS-e820: 00000000fed1c000 - 00000000fed40000 (reserved)                                         
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)                                         
BIOS-e820: 0000000100000000 - 000000021f800000 (usable)                                          
DMI 2.7 present.                                                                                   
No NUMA configuration found
Faking a node at 0000000000000000-00000000fffff000
Bootmem setup node 0 0000000000000000-00000000fffff000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 21
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 21
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Setting APIC routing to physical flat
ACPI: HPET id: 0x8086a701 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009a000 - 000000000009b000
Nosave address range: 000000000009b000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e0000
Nosave address range: 00000000000e0000 - 0000000000100000
Nosave address range: 00000000df3e2000 - 00000000df429000
Nosave address range: 00000000df429000 - 00000000df431000
Nosave address range: 00000000df431000 - 00000000df446000
Nosave address range: 00000000df446000 - 00000000df447000
Nosave address range: 00000000df447000 - 00000000df458000
Nosave address range: 00000000df458000 - 00000000df45b000
Nosave address range: 00000000df45b000 - 00000000df482000
Nosave address range: 00000000df484000 - 00000000df505000
Nosave address range: 00000000df505000 - 00000000df50f000
Nosave address range: 00000000df50f000 - 00000000df536000
Nosave address range: 00000000df536000 - 00000000df579000
Nosave address range: 00000000df800000 - 00000000fed1c000
Nosave address range: 00000000fed1c000 - 00000000fed40000
Nosave address range: 00000000fed40000 - 00000000ff000000
Nosave address range: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: df800000:1f51c000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
Built 1 zonelists.  Total pages: 899288
Kernel command line: ro root=LABEL=/ mem=0xFFFFFFFF reserve=0x100000000,0xff000000 console=ttyS0,115200n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
ACPI: DMAR not present
Memory: 3588052k/4194300k available (2601k kernel code, 71680k reserved, 1299k data, 204k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.27 BogoMIPS (lpj=2500138)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 6.250 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5000.06 BogoMIPS (lpj=2500031)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM1)
         Intel(R) Celeron(R) CPU G540 @ 2.50GHz stepping 07
Brought up 2 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2500.138 MHz processor.
migration_cost=31
checking if image is initramfs... it is
Freeing initrd memory: 2634k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 64-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
pnp: 00:02: ioport range 0xa00-0xa7f has been reserved
pnp: 00:02: ioport range 0xa00-0xa1f has been reserved
pnp: 00:02: ioport range 0xa20-0xa2f has been reserved
pnp: 00:02: ioport range 0xa24-0xa33 could not be reserved
pnp: 00:02: ioport range 0xa28-0xa37 could not be reserved
pnp: 00:0a: ioport range 0x400-0x453 could not be reserved
pnp: 00:0a: ioport range 0x458-0x47f has been reserved
pnp: 00:0a: ioport range 0x1180-0x119f has been reserved
pnp: 00:0a: ioport range 0x500-0x57f has been reserved
pnp: 00:0b: ioport range 0x454-0x457 has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: fbc00000-fbdfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:03:01.0
  IO window: d000-dfff
  MEM window: fba00000-fbafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:03:05.0
  IO window: c000-cfff
  MEM window: fb900000-fb9fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:03:07.0
  IO window: b000-bfff
  MEM window: fb800000-fb8fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:03:09.0
  IO window: a000-afff
  MEM window: fb700000-fb7fffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.0
  IO window: a000-dfff
  MEM window: fb700000-fbafffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
  IO window: a000-dfff
  MEM window: fb700000-fbbfffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.7
  IO window: e000-efff
  MEM window: fbe00000-fbefffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 177
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI Interrupt 0000:03:05.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 18 (level, low) -> IRQ 185
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 16 (level, low) -> IRQ 169
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 193
ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 177
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1501833342.317:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [   AMI] OemTableId [     CST] [20060707]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
rial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 204k freed
Write protecting the kernel read-only data: 507k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
LoACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
ading ehci-hcd.kehci_hcd 0000:00:1a.0: EHCI Host Controller
o module
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: irq 169, io mem 0xfbf02000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 20 sharing vector 0x5A and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 90
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: irq 90, io mem 0xfbf01000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
Loading ohci-hcdUSB Universal Host Controller Interface driver v3.0
.ko module
Loading uhci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko modulSCSI subsystem initialized
e
Loading sd_mod.ko module
Loading libata.ko module
Loading ahci.ko ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 177
module
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbf00000 port 0xfbf00100 irq 98
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: RDM-I XL010, 100415, max UDMA/133
ata1.00: 7856128 sectors, multi 1: LBA48
ata1.00: configured for UDMA/133
  Vendor: ATA       Model: RDM-I XL010       Rev: 1004
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 7856128 512-byte hdwr sectors (4022 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
SCSI device sda: 7856128 512-byte hdwr sectors (4022 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: Attached scsi disk sda
Loading usb-storInitializing USB Mass Storage driver...
age.ko module
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Waiting for driver initialization.
Loading dm-mem-cache.ko module
device-mapper: uevent: version 1.0.3
Loading dm-mod.kdevice-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
o module
Loading dm-log.ko module
Loadindevice-mapper: dm-raid45: initialized v0.2594l
g dm-region_hash.ko module
Loading dm-message.ko module
Loading dm-raid45.ko module
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
Creating root device.
Mounting root filesystem.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
                Welcome to  CentOS release 5.5 (Final)
                Press 'I' to enter interactive startup.
Setting clock  (utc): Fri Aug  4 15:56:15 CST 2017 [  OK  ]
Starting udev: [  OK  ]
Setting hostname 00:B3:42:01:15:08:  [  OK  ]
No devices found
Setting up Logical Volume Management: [  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda2
/: clean, 17039/512512 files, 296367/512071 blocks
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1
/boot: clean, 33/50200 files, 18209/200780 blocks
[/sbin/fsck.ext3 (1) -- /odsp/config/local] fsck.ext3 -a /dev/sda5
/dev/sda5: clean, 43/100744 files, 23295/401409 blocks
[/sbin/fsck.ext3 (1) -- /odsp/config/remote] fsck.ext3 -a /dev/sda6
/dev/sda6: clean, 43/100744 files, 23295/401409 blocks
[/sbin/fsck.ext3 (1) -- /odsp/log/local] fsck.ext3 -a /dev/sda7
/dev/sda7: clean, 27/50200 files, 21832/200780 blocks
[/sbin/fsck.ext3 (1) -- /odsp/log/remote] fsck.ext3 -a /dev/sda8
/dev/sda8: clean, 15/50200 files, 11991/200780 blocks
[/sbin/fsck.ext3 (1) -- /var/log] fsck.ext3 -a /dev/sda9
/dev/sda9 contains a file system with errors, check forced.
/dev/sda9: Duplicate or bad block in use!
/dev/sda9: Multiply-claimed block(s) in inode 8: 4120 4420 5140 5141 5142 5143 5145 5146 5147 5148 5149 5150 5151 5140 5141 5142 5143 4120 5145 5146 5147 5148 5149 5150 5151 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5215 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 7308 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5215 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5198 5199 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5440 5441 5442 5443 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5440 5441 5442 5443 4420 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5598 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5469 5598 5471 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 7308
/dev/sda9: (There are 0 inodes containing multiply-claimed blocks.)

/dev/sda9: File <The journal inode> (inode #8, mod time Thu Oct 20 11:46:41 2011)
  has 507 multiply-claimed block(s), shared with 0 file(s):
/dev/sda9:

/dev/sda9: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
        (i.e., without -a or -p options)
[FAILED]

*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance
(or type Control-D to continue):



这是一台ip san 的启动记录  请问大神们，谁能看出是哪出问题了吗

路过路过，等后面的大神解答吧

飘过，不懂，帮顶。希望大师出来解题。

排除法，试试