[巴法络] Buffalo WXL/WVL出新固件了：1.58版本

这个固件可以破解么！

* LinkStation Series Firmware Updater Ver.1.58

Name                  LinkStation Series Firmware Updater
Version                  Ver.1.58
File                          ls_series-158.zip
Size                  240,373,760 Bytes
Date                  April 19, 2012
Platform                  DOS/V, PC98-NX
OS                          Windows 2000/XP/Vista/7
Model                  LS-XHL, LS-CHL, LS-WXL, LS-WSXL, LS-VL, LS-WVL, LS-QVL Series
Copyright          BUFFALO INC.
Distribution          Distribution ZIP archive (Created by WinRAR.)
Condition          Re-distribution is not allowed.
Manual                  Quick Setup Guide
                          Reference Guide
This product uses GPL/LGPL applicable software and your are welcome to
have, modify and redistribute these source codes.
Please ask our technical support people about modified GPL, applicable
module and how to deliver them. You may be charged for delivery cost.

[Software description]
This software is LinkStation Series Firmware Update Utility to update unit firmware to Ver.1.58.
If your unit firmware is Ver.1.58 or later version, you do not have to use this utility.

* If the LinkStation became EM Mode, firmware update might recover the unit.

[How to confirm firmware version]
Select LinkStation from NAS Navigator2 utility search screen.
The firmware version is displayed right and bottom corner in the status screen.
If the unit name shown LS-***-EM*** in the status screen, the LinkStation becomes EM (Emergency) mode.

[Caution]
- Please consult you local representative if you experience malfunction problem cause by firmware update.
- Do not turn the unit off until complete messages appear. It might takes several minutes in the case.
- After Ver.1.51, due to adding online update features and error and information codes,
  when TeraStation detects the online update, the message

    "I52:Unknown error occurred"

  is displayed depending on the version of the NAS Navigator2 you are using.
  Please update to the latest NAS Navigator2.

[How to use updater]
1. Double click the file you have downloaded to extract it.
2. Please refer to the update instruction launched automatically.
* Confirm some tips describing IP address in [update.htm] then follow the instruction.


[Firmware Release Note]
* Ver.1.58 [2012.4.19]
  - Fixed an issue appearing "Media Server update can not be updated completely" warning and error message when configration Media Server.

* Ver.1.57 [2012.3.22]
  - Fixed an issue the header of email notification includes bad timestamp.
  - Fixed an issue formatting of newly added disk fails.
  - Fixed an issue the firmware installation fails on the enclosure model.

我刷的还是1.54的改机版的。

和原来的方法一样，已成功

楼上的能帮我看一下1.58里的Squeezebox server版本有升级吗？现在的版本号是多少？

难道唯一的变化就是“ Fixed an issue appearing "Media Server update can not be updated completely" warning and error message when configration Media Server.” ？

回复@Quaking:看不出有什么改进

来自 广西书生 的新浪微博

1.57的没必要更新

还在用1.54修改版的飘过

升级后界面没变，只是多了几个选项。

怎么我升级之后不能按1.57方法改机下BT了呢

准备试一下。