[巴法络] 【2011-11-09更新】Buffalo WXL/WVL等机型开启NFS协议教程（简化版

你的資料夾下沒有這個檔案，自已創立一個空檔就可以了。

我买的新的巴比禄的WVL就要到了，晚上回去折腾一下。

谢谢，按你的办法巳解决，读写权限要设成777

谢谢，按你的办法巳解决，读写权限要设成777

先收藏！！！！！！！

我的怎么弄也不成功，总是 mountd is NOT running.
求高手指点

root@DanielNas:/mnt/array1/share# exportfs -rv        
exporting *:/mnt/array1/share
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S55portmap start
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S99nfs start
root@DanielNas:/mnt/array1/share# /opt/etc/init.d/S99nfs status
portmap is running.
mountd is NOT running.
root@DanielNas:/mnt/array1/share#

请问大虾，刷修改版固件，或者改机，硬盘内的数据会丢失吗？

谢谢分享，学习一下.

一开始提示
root@LS-WVL17A:/# exportfs -rv                    
exporting *:/mnt/disk2/Media
exportfs: can't open /var/lib/nfs/rmtab for reading
然后建立rmtab文件，权限设置777。
之后重新执行
exportfs -rv
/opt/etc/init.d/S55portmap start
/opt/etc/init.d/S99nfs start
然后
root@LS-WVL17A:/# /opt/etc/init.d/S99nfs status
portmap is running.
mountd is NOT running.
这个是什么问题呢

我也遇到这个问题了，不知道是什么问题呀！

一样的问题，难道要放弃nfs了吗？

我是1.62官方固件，成功实现了PT和迅雷离线。但nfs才是真正发挥作用的啊！

root@Nas:~# ipkg install e2fslibs
Package e2fslibs (1.41.14-1) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~# ipkg install portmap
Package portmap (4-5) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~#

好像装不上啊，怎么回事，新人求助

谢谢分享，学习一下！

root@Nas:~# ipkg install e2fslibs
Package e2fslibs (1.41.14-1) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~# ipkg install portmap
Package portmap (4-5) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~#

好像装不上啊，怎么回事，新人求助

root@Nas:~# ipkg install e2fslibs
Package e2fslibs (1.41.14-1) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~# ipkg install portmap
Package portmap (4-5) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:~#

好像装不上啊，怎么回事，新人求助

按照你的教程做的，结果如下,好像没成功，求大侠帮忙指教。160mod的固件，pt迅雷都可以用了。
特别查了下，/opt/etc/init.d下的S99nfs和S55portmap居然大小是0，急啊

root@Nas:~# cd /mnt/disk1/tmp/
root@Nas:/mnt/disk1/tmp# wget http://downloads.buffalo.nas-cen ... nel/nfstools.tar.gz
cd /--2012-12-01 09:28:23--  http://downloads.buffalo.nas-cen ... nel/nfstools.tar.gz
Resolving downloads.buffalo.nas-central.org... 140.211.169.172
Connecting to downloads.buffalo.nas-central.org|140.211.169.172|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 417155 (407K) [application/octet-stream]
Saving to: `nfstools.tar.gz.1'

100%[==============================================================================================================================>] 417,155      248K/s   in 1.6s   

2012-12-01 09:28:25 (248 KB/s) - `nfstools.tar.gz.1' saved [417155/417155]

root@Nas:/mnt/disk1/tmp# cd /
root@Nas:/# tar xvzf /mnt/disk1/tmp/nfstools.tar.gz
gzip: invalid magic
tar: Child returned status 1
tar: Error exit delayed from previous errors
root@Nas:/# /mnt/disk1/ *(rw,sync,no_root_squash,no_subtree_check,insecure)
-bash: syntax error near unexpected token `('
root@Nas:/# /mnt/disk1/ptmov/ *(rw,sync,no_root_squash,no_subtree_check,insecure)
-bash: syntax error near unexpected token `('
root@Nas:/# exportfs -rv
-bash: exportfs: command not found
root@Nas:/# /opt/etc/init.d/S55portmap start
root@Nas:/# /opt/etc/init.d/S99nfs start
-bash: /opt/etc/init.d/S99nfs: Permission denied
root@Nas:/# /opt/etc/init.d/S99nfs status
-bash: /opt/etc/init.d/S99nfs: Permission denied
root@Nas:/# ipkg install e2fslibs   
Package e2fslibs (1.41.14-1) installed in root is up to date.
Nothing to be done
Successfully terminated.
root@Nas:/#

开启成功

portmap is running.
mountd is NOT running.

好像没成功啊

我今天重新试试nfs的安装，发现了一些问题，可能帮上你了。
你把/opt/etc/init.d/S99nfs文件里面的这一行改一下改成这样

mountd 没有启动怎么办呢