扫描二维码关注官方公众号
返回列表 发布新帖

[求助/讨论] 讨论一下 transmission skip verify .. 有兴趣么 ?

5895 9
发表于 2011-6-29 12:38:04 | 查看全部 阅读模式

来吧兄弟,一起玩一起讨论!

您需要 登录 才可以下载或查看,没有账号?注册

×
本帖最后由 iblicf 于 2011-6-29 19:33 编辑

一部分盒子、 VPS 装的是 transmission-daemon , 用 transmission-remote  控制 ; 这样用例应该都碰见过; 大文件辅种的时候,校验很长时间,,有时候竟然跟下载的耗时差不多,辅一个校验一次 ;

配置文件里没有,什么设置可以跳过,,(类似 uTorrent 有 skip hash check )节约时间 ; 好像 rtorrent 有设置项目 ;

在网上找相关的,没搜到什么有价值的 。。就看到一个老外提供一个思路,说的不是很清楚 :

Firstly, in the previous 2.1x version of Transmission, I found a trick to do this. I just wrote a script to build a .resume file corresponding to the torrent I wanted to add *BEFORE* I really added it to Transmission and moved that .resume file to the directory where it should be. The .resume file I built is almost identical to the one Transmission would made for a seeding torrent, therefore when I added the torrent by transmission-remote, Transmission thought the torrent was already in the seeding list and kept on seeding *WITHOUT* any local data verifying. This trick just worked fine in the pre-2.2x version.

哪位有相关的经验 ,讨论一下子 。。有没有兴趣啊 ?

=====================================
更新到 v2.31 , 没找到取消校验的配置项目 。。

评论9

homerun72Lv.3 发表于 2011-6-29 13:56:01 | 查看全部
在2.20版的Release Notes有一条是

"File re-verification is no longer needed in some situations"

我目前是用2.1.3版还没试过,用tr辅大种真的很麻烦...
这个老外写的script不知道哪里能找的到?
回复 点赞

使用道具 举报

overmindoyjLv.6 发表于 2011-6-29 14:17:33 | 查看全部
只能说速度确实很快。40G的校验半小时足以搞定吧





回复 点赞

使用道具 举报

iblicf楼主Lv.9 发表于 2011-6-29 14:20:02 | 查看全部
overmindoyj 发表于 2011-6-29 14:17
只能说速度确实很快。40G的校验半小时足以搞定吧

那么快 。。30~40 的我这个至少2小时
回复 点赞

使用道具 举报

overmindoyjLv.6 发表于 2011-6-29 14:29:01 | 查看全部
iblicf 发表于 2011-6-29 14:20
那么快 。。30~40 的我这个至少2小时

那你得查查硬盘是否有问题了。我常辅种美剧包的,对这个时间熟的很





回复 点赞

使用道具 举报

wfhwfhLv.9 发表于 2011-6-29 14:54:02 | 查看全部
不要TR了咯,用RT吧
回复 点赞

使用道具 举报

iblicf楼主Lv.9 发表于 2011-6-29 17:38:31 | 查看全部
homerun72 发表于 2011-6-29 13:56
在2.20版的Release Notes有一条是

"File re-verification is no longer needed in some situations"

嗯,我试试最新版去,,有风险啊, vps 已经有200G的东西了
回复 点赞

使用道具 举报

festLv.8 发表于 2011-6-29 17:48:57 | 查看全部
*.resume就是bencode的数据,看一下就明白了吧
自行生成的时候略过peers一项就行了

话说dg也可以跳过hash,嘛在U2的应该有人看过吧……

回复 点赞

使用道具 举报

iblicf楼主Lv.9 发表于 2011-6-29 18:12:45 | 查看全部
本帖最后由 iblicf 于 2011-6-29 23:34 编辑

Changes
Transmission 2.31 (2011/05/17)

All tickets closed by this release
All Platforms

    This release fixes a 2.30 packaging error

Transmission 2.30 (2011/05/16)

All tickets closed by this release
All Platforms

  µTP support
    UDP tracker support
    Multiscrape support
    Download scarcest pieces first
    The "lazy bitfield" feature has been superseded by the "Fast Extension" BEP6
    Scripts are passed the environment

Mac

    An Intel Mac is now required
    Ability to remove all completed (finished seeding) transfers
    The Web Interface is published over Wide-Area Bonjour
    Enhanced grouping rules
    Interface tweaks

GTK+

    Added 256 x 256 icon by Andreas Nilsson
    Register as a magnet link handler in the .desktop file

Web Client

    Peer and Network preferences

Transmission 2.22 (2011/03/04)

All tickets closed by this release
All Platforms

    Faster endgame
    Fix bug where leechers might be disconnected while seeding in some situations
    Fix 2.20 bug that sometimes showed inaccurate upload/download speeds
    Support for unsorted blacklists
    Fix IPv6 DHT
    Re-add support to automatically close idle peers
    Fix bug where the resume file did not save the time checked for the last piece

Mac

    Fixes for Dutch, German, and Russian localizations

GTK+

    Fix setting individual idle seeding time

Qt

    Fix loading localizations on Linux

CLI

    Fix bandwidth display issue

Transmission 2.21 (2011/02/08)

All tickets closed by this release
All Platforms

    Fix compile error in the the 2.20 tarball

GTK+

    Several updated translations

Qt

    Updated Spanish translation

Transmission 2.20 (2011/02/06)

All tickets closed by this release
All Platforms

    Remember downloaded files when a drive is unplugged
    File re-verification is no longer needed in some situations
    Fix "Too many open files" error
    Show the total downloading and seeding time per torrent
    Fix webseeds
    Better support for IPv6-only trackers
    Add the ability to shutdown Transmission sessions via RPC
    NAT-PMP and UPnP now also map the UDP port
    Update the DHT code to dht-0.18
    Faster parsing of bencoded data
    Improve support for running scripts when a torrent finishes downloading
    Fix reannounce interval when trackers return a 404 error
    Fix checksum error on platforms running uClibc 0.9.27 or older
    Fix memmem() errors on Solaris

Mac

    Fix issues in the German and Spanish localizations
    Interface tweaks
    Support ZIP and other compression formats in the blocklist downloader

GTK+

    Add "Add" and "Remove" buttons to the tracker list
    Add filesize column to the files list
    Several minor bugfixes and interface improvements

Qt

    Accept info_hash values in the "Add url..." dialog

Daemon

    Add "reannounce to tracker" option to transmission-remote
    transmission-remote can now read auth info from environment variables
    Fix configuration file bug with transmission-daemon running on Macs

Web Client

    Right-clicking a torrent now works with Firefox / Firegestures / Ubuntu

Utils

    Fix error when replacing substrings in tracker announce URLs
    Webseeds are now displayed in transmission-show

Transmission 2.13 (2010/12/09)

All tickets closed by this release
All Platforms

   Fix "No Announce Scheduled" tracker error
    Fix build error on Solaris 10
    Fix RPC documentation errors
    Fix minor packaging errors

Mac

    Add option to run a script when torrents finish downloading
    Simplify editing the blocklist URL in the preferences window

GTK+

    Unblur the statusbar icons
    Fix truncation error in the Torrent Properties dialog.

Qt

    Fix crash when opening the Torrent Properties dialog on magnet links
    Fix "undo" error when making changes in the Torrent Properties dialog
    Add Brazilian Portuguese Translation
    Add Spanish (LAC) Translation

============================================
【备忘】ubuntu 添加源

sources.list  ( natty 11.04 )
  1. deb http://ppa.launchpad.net/transmissionbt/ppa/ubuntu natty main
  2. deb-src http://ppa.launchpad.net/transmissionbt/ppa/ubuntu natty main
复制代码
  1. sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 365C5CA1
复制代码
  1. apt-get update && apt-get upgrade
复制代码
回复 点赞

使用道具 举报

iblicf楼主Lv.9 发表于 2011-6-29 18:31:19 | 查看全部
本帖最后由 iblicf 于 2011-6-29 19:35 编辑
fest 发表于 2011-6-29 17:48
*.resume就是bencode的数据,看一下就明白了吧
自行生成的时候略过peers一项就行了

应该是这个意思 ,,估计他自动生成是拷贝另一个 .resume . 改 tracker , 他的脚本应该在 vps 做的。。
我要做的话,只能 ftp 托回来,bencode 改,,ftp 传上去 。。
========================================

拖回来一个 .resume 文件,打开来郁闷了,不知道该改啥

比如文件名类似:
Trust.2011.BluRay.720p.AC3.x264-CHD.14a328420743453f.resume  , 这一串东西什么意思
回复 点赞

使用道具 举报

回复

您需要登录后才可以回帖 登录 | 注册

本版积分规则

淘宝小店

邀请码

VIP会员

微信客服

公众号

微信群

投诉/建议联系

support@gebi1.cn

未经授权禁止转载,复制和建立镜像,
如有违反,追究法律责任
  • 关注公众号
  • 添加微信客服
Copyright © 2001-2024 隔壁网 版权所有 All Rights Reserved. 粤ICP备14056481号-1
关灯 在本版发帖
扫一扫添加微信客服
返回顶部
快速回复 返回顶部 返回列表