讨论一下 transmission skip verify .. 有兴趣么 ？
本帖最后由 iblicf 于 2011-6-29 19:33 编辑一部分盒子、 VPS 装的是 transmission-daemon , 用 transmission-remote控制 ； 这样用例应该都碰见过； 大文件辅种的时候，校验很长时间，，有时候竟然跟下载的耗时差不多，辅一个校验一次 ；
配置文件里没有，什么设置可以跳过，，（类似 uTorrent 有 skip hash check ）节约时间 ； 好像 rtorrent 有设置项目 ；
在网上找相关的，没搜到什么有价值的 。。就看到一个老外提供一个思路，说的不是很清楚 ：
Firstly, in the previous 2.1x version of Transmission, I found a trick to do this. I just wrote a script to build a .resume file corresponding to the torrent I wanted to add *BEFORE* I really added it to Transmission and moved that .resume file to the directory where it should be. The .resume file I built is almost identical to the one Transmission would made for a seeding torrent, therefore when I added the torrent by transmission-remote, Transmission thought the torrent was already in the seeding list and kept on seeding *WITHOUT* any local data verifying. This trick just worked fine in the pre-2.2x version.
哪位有相关的经验 ，讨论一下子 。。有没有兴趣啊 ?
=====================================
更新到 v2.31 , 没找到取消校验的配置项目 。。
在2.20版的Release Notes有一条是
"File re-verification is no longer needed in some situations"
我目前是用2.1.3版还没试过，用tr辅大种真的很麻烦...
这个老外写的script不知道哪里能找的到? 只能说速度确实很快。40G的校验半小时足以搞定吧 overmindoyj 发表于 2011-6-29 14:17 static/image/common/back.gif
只能说速度确实很快。40G的校验半小时足以搞定吧
那么快 。。30~40 的我这个至少2小时
iblicf 发表于 2011-6-29 14:20 static/image/common/back.gif
那么快 。。30~40 的我这个至少2小时
那你得查查硬盘是否有问题了。我常辅种美剧包的，对这个时间熟的很
不要TR了咯，用RT吧 homerun72 发表于 2011-6-29 13:56 static/image/common/back.gif
在2.20版的Release Notes有一条是
"File re-verification is no longer needed in some situations"
嗯，我试试最新版去，，有风险啊， vps 已经有200G的东西了
*.resume就是bencode的数据，看一下就明白了吧
自行生成的时候略过peers一项就行了
话说dg也可以跳过hash，嘛在U2的应该有人看过吧…… 本帖最后由 iblicf 于 2011-6-29 23:34 编辑
Changes
Transmission 2.31 (2011/05/17)
All tickets closed by this release
All Platforms
This release fixes a 2.30 packaging error
Transmission 2.30 (2011/05/16)
All tickets closed by this release
All Platforms
µTP support
UDP tracker support
Multiscrape support
Download scarcest pieces first
The "lazy bitfield" feature has been superseded by the "Fast Extension" BEP6
Scripts are passed the environment
Mac
An Intel Mac is now required
Ability to remove all completed (finished seeding) transfers
The Web Interface is published over Wide-Area Bonjour
Enhanced grouping rules
Interface tweaks
GTK+
Added 256 x 256 icon by Andreas Nilsson
Register as a magnet link handler in the .desktop file
Web Client
Peer and Network preferences
Transmission 2.22 (2011/03/04)
All tickets closed by this release
All Platforms
Faster endgame
Fix bug where leechers might be disconnected while seeding in some situations
Fix 2.20 bug that sometimes showed inaccurate upload/download speeds
Support for unsorted blacklists
Fix IPv6 DHT
Re-add support to automatically close idle peers
Fix bug where the resume file did not save the time checked for the last piece
Mac
Fixes for Dutch, German, and Russian localizations
GTK+
Fix setting individual idle seeding time
Qt
Fix loading localizations on Linux
CLI
Fix bandwidth display issue
Transmission 2.21 (2011/02/08)
All tickets closed by this release
All Platforms
Fix compile error in the the 2.20 tarball
GTK+
Several updated translations
Qt
Updated Spanish translation
Transmission 2.20 (2011/02/06)
All tickets closed by this release
All Platforms
Remember downloaded files when a drive is unplugged
File re-verification is no longer needed in some situations
Fix "Too many open files" error
Show the total downloading and seeding time per torrent
Fix webseeds
Better support for IPv6-only trackers
Add the ability to shutdown Transmission sessions via RPC
NAT-PMP and UPnP now also map the UDP port
Update the DHT code to dht-0.18
Faster parsing of bencoded data
Improve support for running scripts when a torrent finishes downloading
Fix reannounce interval when trackers return a 404 error
Fix checksum error on platforms running uClibc 0.9.27 or older
Fix memmem() errors on Solaris
Mac
Fix issues in the German and Spanish localizations
Interface tweaks
Support ZIP and other compression formats in the blocklist downloader
GTK+
Add "Add" and "Remove" buttons to the tracker list
Add filesize column to the files list
Several minor bugfixes and interface improvements
Qt
Accept info_hash values in the "Add url..." dialog
Daemon
Add "reannounce to tracker" option to transmission-remote
transmission-remote can now read auth info from environment variables
Fix configuration file bug with transmission-daemon running on Macs
Web Client
Right-clicking a torrent now works with Firefox / Firegestures / Ubuntu
Utils
Fix error when replacing substrings in tracker announce URLs
Webseeds are now displayed in transmission-show
Transmission 2.13 (2010/12/09)
All tickets closed by this release
All Platforms
Fix "No Announce Scheduled" tracker error
Fix build error on Solaris 10
Fix RPC documentation errors
Fix minor packaging errors
Mac
Add option to run a script when torrents finish downloading
Simplify editing the blocklist URL in the preferences window
GTK+
Unblur the statusbar icons
Fix truncation error in the Torrent Properties dialog.
Qt
Fix crash when opening the Torrent Properties dialog on magnet links
Fix "undo" error when making changes in the Torrent Properties dialog
Add Brazilian Portuguese Translation
Add Spanish (LAC) Translation
============================================
【备忘】ubuntu 添加源
sources.list( natty 11.04 )deb http://ppa.launchpad.net/transmissionbt/ppa/ubuntu natty main
deb-src http://ppa.launchpad.net/transmissionbt/ppa/ubuntu natty main sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 365C5CA1apt-get update && apt-get upgrade 本帖最后由 iblicf 于 2011-6-29 19:35 编辑
fest 发表于 2011-6-29 17:48 static/image/common/back.gif
*.resume就是bencode的数据，看一下就明白了吧
自行生成的时候略过peers一项就行了
应该是这个意思 ，，估计他自动生成是拷贝另一个 .resume . 改 tracker , 他的脚本应该在 vps 做的。。
我要做的话，只能 ftp 托回来，bencode 改，，ftp 传上去 。。
========================================
拖回来一个 .resume 文件，打开来郁闷了，不知道该改啥 。
比如文件名类似：
Trust.2011.BluRay.720p.AC3.x264-CHD.14a328420743453f.resume， 这一串东西什么意思
页:
[1]