扫描二维码关注官方公众号
返回列表 发布新帖

[求助/问答] 现在群晖basic模式存储空间ubuntu也无法读取?

3893 2
发表于 2015-9-23 16:51:41 | 显示全部楼层 阅读模式

来吧兄弟,一起玩一起讨论!

您需要 登录 才可以下载或查看,没有账号?注册

×
利用虚拟机装了个5.1-5022测试,新增存储空间:
存储空间类型 Basic(无数据保护)
文件系统 ext4
然后在DSM系统和Ubuntu系统下查看此分区,fdisk -l,都是
DS3615xs> fdisk -l

Disk /dev/sdc: 8589 MB, 8589934592 bytes
255 heads, 63 sectors/track, 1044 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sdc1               1         311     2490240  fd Linux raid autodetect
Partition 1 does not end on cylinder boundary
/dev/sdc2             311         572     2097152  fd Linux raid autodetect
Partition 2 does not end on cylinder boundary
/dev/sdc3             588        1032     3567616  fd Linux raid autodetect

/dev/sdc3还是fd Linux raid autodetect,网上看了文章,说basic模式可以直接在ubuntu下挂载ext4,难道是早期系统?


评论2

msnyong楼主Lv.9 发表于 2015-9-23 17:10:55 | 显示全部楼层
在ubuntu下:
ubuntu@ubuntu:~$ sudo apt-get install mdadm lvm2
ubuntu@ubuntu:~$ sudo mdadm -Asf && vgchange -ay
mdadm: /dev/md/2 has been started with 1 drive.
然后
mount /dev/md/2 /mnt
df -T可以看到挂载成功一个ext4的数据分区
参考:http://www.chiphell.com/thread-1093099-1-1.html
回复 点赞

使用道具 举报

若水@智Lv.5 发表于 2015-10-2 14:59:01 | 显示全部楼层
百度 raid设置
回复 点赞

使用道具 举报

回复

懒得打字嘛,点击右侧快捷回复 【本站酷狼4T,750元】
您需要登录后才可以回帖 登录 | 注册

本版积分规则

投诉/建议联系

support@gebi1.cn

未经授权禁止转载,复制和建立镜像,
如有违反,追究法律责任
  • 关注公众号
  • 添加微信客服
Copyright © 2001-2024 隔壁网 版权所有 All Rights Reserved. 粤ICP备14056481号-1
关灯 在本版发帖
扫一扫添加微信客服
返回顶部
快速回复 返回顶部 返回列表