【教程】在VPS（Debian)上Transmission的安装记录兼教程
本帖最后由 genab 于 2013-6-6 09:34 编辑1. 前言：
原来都是在Centos上装Transmission挂PT的，这两天在折腾我的VPS，分别试着在Centos和Debian上安装了rtorrent+rutorrent，结果发现rtorrent和transmission相比，并不是很稳定，经常崩溃，虽然可以写脚本定时检查重启，但每次重启都会重新hash文件，问题多多，所以个人以为还是transmission比较合适个人安装使用，之所以rtorrent很多seedbox在用，主要是它比较容易支持多用户，适合多人共享。最终决定还是装回transmission，因为reload的OS是debian，所以也不准备换成centos，于是就有了这篇教程。
2.升级系统
我这里reload的是debian-5.0x86的，不同的版本有可能出现的错误不一样，有问题可以跟贴问，为了方便，我这里都是用root登录安装的
首先升级系统：apt-get update
apt-get upgrade结果第一条命令就有错误：GPG error: http://ftp.de.debian.org lenny/updates Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY AED4B06F473041FA
你不能忽略这这个，不然下面安装必要库文件的时候会有些库装不上，要解决这个错误，输入下面命令apt-get install debian-archive-keyring然后重新输入上面两条命令，这次就没有错误了，你需要等几分钟等这个过程结束，这取决于你的VPS
3.安装Transmission
先安装必要的库文件这个可以在transmission的网站找到，所以很简单，直接输入apt-get install build-essential automake make autoconf libtool pkg-config libcurl4-openssl-dev intltool libxml2-dev libgtk2.0-dev libnotify-dev libglib2.0-dev libevent-dev下载transmission，我这里下的是2.13，并不是最新版，因为最新的版本不在我常去PT的允许客户端列表里，你安装的时候也可以看看你所混的PT的FAQ，然后下载合适的版本，不然被Ban了不要怪我wget http://download.m0k.org/transmission/files/transmission-2.13.tar.bz2
tar xvjf transmission-2.13.tar.bz2
cd transmission-2.13
./configure在./configure那一步出现错误：configure: error: libevent 1.4.9 or higher not found!因此下载安装所需要的libevent版本：wget http://ftp.us.debian.org/debian/pool/main/libe/libevent/libevent-1.4-2_1.4.13-stable-1_i386.deb
wget http://ftp.us.debian.org/debian/pool/main/libe/libevent/libevent-core-1.4-2_1.4.13-stable-1_i386.deb
wget http://ftp.us.debian.org/debian/pool/main/libe/libevent/libevent-extra-1.4-2_1.4.13-stable-1_i386.deb
wget http://ftp.us.debian.org/debian/pool/main/libe/libevent/libevent-dev_1.4.13-stable-1_i386.deb
dpkg -i *.deb然后继续./configure
make
make install到此transmission算是初步装完了 本帖最后由 trott 于 2011-2-22 02:07 编辑
4.安装Transmission的启动，停止脚本
脚本在transmission网站有现成的，为了方便起见，我还是把它放在这里
#! /bin/sh
### BEGIN INIT INFO
# Provides: transmission-daemon
# Required-Start: networking
# Required-Stop: networking
# Default-Start: 2 3 5
# Default-Stop: 0 1 6
# Short-Description: Start the transmission BitTorrent daemon client.
### END INIT INFO
# Original Author: Lennart A. JÃŒtte, based on Rob Howell's script
# Modified by Maarten Van Coile & others (on IRC)
# Do NOT "set -e"
#
# ----- CONFIGURATION -----
#
# For the default location Transmission uses, visit:
# http://trac.transmissionbt.com/wiki/ConfigFiles
# For a guide on how set the preferences, visit:
# http://trac.transmissionbt.com/wiki/EditConfigFiles
# For the available environement variables, visit:
# http://trac.transmissionbt.com/wiki/EnvironmentVariables
#
# The name of the user that should run Transmission.
# It's RECOMENDED to run Transmission in it's own user,
# by default, this is set to 'transmission'.
# For the sake of security you shouldn't set a password
# on this user
USERNAME=transmission
# ----- *ADVANCED* CONFIGURATION -----
# Only change these options if you know what you are doing!
#
# The folder where Transmission stores the config & web files.
# ONLY change this you have it at a non-default location
#TRANSMISSION_HOME="/var/config/transmission-daemon"
#TRANSMISSION_WEB_HOME="/usr/share/transmission/web"
#
# The arguments passed on to transmission-daemon.
# ONLY change this you need to, otherwise use the
# settings file as per above.
#TRANSMISSION_ARGS=""
# ----- END OF CONFIGURATION -----
#
# PATH should only include /usr/* if it runs after the mountnfs.sh script.
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
DESC="bittorrent client"
NAME=transmission-daemon
DAEMON=$(which $NAME)
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
# Load the VERBOSE setting and other rcS variables
[ -f /etc/default/rcS ] && . /etc/default/rcS
#
# Function that starts the daemon/service
#
do_start()
{
# Export the configuration/web directory, if set
if [ -n "$TRANSMISSION_HOME" ]; then
export TRANSMISSION_HOME
fi
if [ -n "$TRANSMISSION_WEB_HOME" ]; then
export TRANSMISSION_WEB_HOME
fi
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --chuid $USERNAME --start --pidfile $PIDFILE --make-pidfile \
--exec $DAEMON --background --test -- -f $TRANSMISSION_ARGS > /dev/null \
|| return 1
start-stop-daemon --chuid $USERNAME --start --pidfile $PIDFILE --make-pidfile \
--exec $DAEMON --background -- -f $TRANSMISSION_ARGS \
|| return 2
}
#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/10/KILL/5 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently.A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
}
case "$1" in
start)
echo "Starting $DESC" "$NAME..."
do_start
case "$?" in
0|1) echo " Starting $DESC $NAME succeeded" ;;
*) echo " Starting $DESC $NAME failed" ;;
esac
;;
stop)
echo "Stopping $DESC $NAME..."
do_stop
case "$?" in
0|1) echo " Stopping $DESC $NAME succeeded" ;;
*) echo " Stopping $DESC $NAME failed" ;;
esac
;;
restart|force-reload)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
echo "Restarting $DESC $NAME..."
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0|1) echo " Restarting $DESC $NAME succeeded" ;;
*) echo " Restarting $DESC $NAME failed: couldn't start $NAME" ;;
esac
;;
*)
echo " Restarting $DESC $NAME failed: couldn't stop $NAME" ;;
esac
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
exit 3
;;
esac
这个脚本文件需要作为transmission-daemon放在/etc/init.d/下面,输入以下命令：
vi /etc/init.d/transmission-daemon
按i，然后把上面这个脚本粘帖进去，按ESC，然后按冒号：，输入wq,按回车，文件就建立好了
接下来更改文件的权限并使它在启动的时候可以自动执行：
chmod +x /etc/init.d/transmission-daemon
chown root:root /etc/init.d/transmission-daemon
update-rc.d transmission-daemon defaults
下来新建一个用户运行transmission，这里用的用户名是transmission，当然你也可以用其他的，不过记得要更改脚本了的USERNAME与之对应
useradd -mr transmission
chmod g+rwx /home/transmission/
建立transmission的下载目录并设定权限：
mkdir -p /home/transmission/Downloads/
chown -R transmission.transmission /home/transmission/Downloads/
chmod g+w /home/transmission/Downloads/
接下来就可以启动transmission了：
/etc/init.d/transmission-daemon start
transmission启动后就自动会在/home/transmission/.config/transmission-daemon下生成settings.json文件，不过在你更改设置之前必须先停止transmission：
/etc/init.d/transmission-daemon stop
这样你就可以开始更改设置了:
vi /home/transmission/.config/transmission-daemon/settings.json
按i以后就可以开始编辑了，至于参数什么意思请参考transmission的网站，改完后按ESC, 按冒号：，输入wq回车存盘
为了方便你在家里的电脑上用Transmission Remote GUI的连上去管理,下面的设置你必须更改：
"rpc-whitelist-enabled": false - 默认是true，要改为false
“rpc-password": "密码",
"rpc-username": "用户名",
上面的密码和用户名你可以自己指定
从新启动transmission，新的设置就会生效：
/etc/init.d/transmission-daemon start
现在你可以下载并安装Transmission Remote GUI，在GUI的options输入VPS的IP地址，rpc的端口（默认是9091，你可以在settings.json中改成其他的），你的用户名和密码，就可以连到你VPS上的transmission了
Transmission Remote GUI的下载地址：
http://transmisson-remote-gui.googlecode.com/files/transgui-2.2-setup.exe
另外如果你用Android的手机，可以在菜市场搜索安装Transdroid，它可以很方便的在手机上管理transmission，也可以在手机上下载torrent，通过它传到vps的transmission里进行下载，非常方便
至此transmission在debian的安装就告一段落了，下来有时间我会写一下如何通过rss和irc自动下载torrent并传给transmission进行下载 mark~收藏备用{:2_115:} 这个正是需要的，最近准备搞个vps玩，希望LZ给推荐个适用于LZ这篇教程又经济实惠的VPS，先谢过了 buyvm（http://www.buyvm.net/）的5.95刀每月的那款很超值，50G硬盘，2T的流量，随便玩玩足够了，这家并不禁止P2P，我还开ticket问过可不可以，他们就回了两个词have fun :),这家的VPS还支持架设PPTP的VPN，你知道的，有时还是有用的 嗯，看了下，确实不错，可惜buyvm第三款配置缺货：（，我又随便点了点其他几款，全部缺货，不知道是我的操作问题，还是怎么.. 我觉得这样的教程帖子应该设权限...大家都去X 就都没得X了 学历 小收藏下 谢谢楼主分享 呵呵，设个权限吧。收藏啦~~~ 不要啊，这种推荐不能说出来啊，要不然大家都跑去挂pt，buyvm就悲剧了。。。。。 Transmission很好用，正在用 楼主的教程很实用啊！ debian6好像默认就2.03
Ubuntu10.0.4 默认是1.93
我觉得这2个版本都挺稳定的
楼主的环境是debian5吧，我一般装1.93 收藏。感谢楼主高人！ 本帖最后由 rafael 于 2011-6-4 11:06 编辑
LZ,,这个找不到命令啊...求解.../etc/init.d/transmission-daemon start
页:
[1]