Redpill Recovery (rr) 24.6.9
本帖最后由 小飞侠 于 2024-7-3 16:53 编辑Redpill Recovery (rr) 24.6.9
下载地址：
**** Hidden Message *****
24.6.9
修复 DT 型号找不到硬盘的问题(from 24.6.8).
修复 acpid 插件未生效的问题(from 24.6.4).
更新 recovery.cgi 默认 shell.
更新 i2c-i801.ko 对 Ice Lake-N, Alder Lake-P/M, Raptor Lake-S, Meteor Lake-P/SoC-S/PCH-S, Birch Stream 的兼容(only epyc7002).
增加 对 XEN 的支持(未完待续).
优化 "格式化磁盘" 显示更多信息.
增加 x2apic 的支持(apollolake,geminilake,purley 架构由于不支持 x2apic, 首次安装完成时会主动重启2次设置).
Fix the disk cannot be found of the DT models(from 24.6.8).
Fix the acpid addon is not effective(from 24.6.4).
Update the default shell of recovery.cgi.
Update the i2c-i801.ko compatibility for Ice Lake-N, Alder Lake-P/M, Raptor Lake-S, Meteor Lake-P/SoC-S/PCH-S, Birch Stream(only epyc7002).
Add support for XEN(not complete).
Optimize "Format disk" to display more information.
Add support for x2apic(apollolake,geminilake,purley architecture since it does not support x2apic, it will actively restart twice to set it after the first installation is completed).
24.6.8
重构 sortnetif addon 的逻辑, 缓解 RR DHCP 失败的问题.
调整 DT 型号支持的 ssd 磁盘数上限为 15 个 ( 之前的版本为 7 个).
优化 对 Hyper-V 磁盘的支持 (对特殊 PCI 路径的一个优化, 依然不支持 Hyper-V 的虚拟磁盘).
优化 翻译和一些逻辑.
Refactor the logic of sortnetif addon to alleviate the problem of RR DHCP failure.
Adjust the upper limit of the number of SSD disks supported by the DT model to 15 (the previous version was 7).
Optimize the support for Hyper-V disks (an optimization for special PCI paths, still does not support Hyper-V virtual disks).
Optimize translation and some logic.
24.6.7
修复 使用低分辨率屏幕(800X600) 时 "添加/编辑 cmdline/synoinfo 参数" 条目无法进入的问题.
修复 特殊操作导致出现的 空 cmdline/synoinfo 参数问题.
修复 个别环境的启动超时时的异常中断.
修复 "初始化 DSM 网络设置" 可能不生效的问题.
修复 "添加新用户到 DSM 系统" 可能破坏原账户用户组的问题.
修复 "设置静态 IP" (单向同步设置到 DSM).
修复 系统更新可能失败的问题.
修复 非 SA6400 型号安装卡 57% 的问题 (from 24.6.6).
修复 个别显卡(PVE 默认) 花屏的问题 (from 24.6.6).
关闭 kexec 的 "Fast reboot".
Fix the "Add/Edit cmdline/synoinfo parameters" item cannot be entered when using a low-resolution screen (800X600).
Fix empty cmdline/synoinfo parameters caused by special operations.
Fix the abnormal interruption when the startup timeout occurs in some environments.
Fix "Initialize DSM network settings" may not take effect.
Fix "Add new users to DSM system" may destroy the original account user group.
Fix "Set static IP" (one-way synchronization settings to DSM).
Fix system updates may fail.
Fix installing error 57% of non-SA6400 models (from 24.6.6).
Fix the problem of screen distortion on some graphics cards (PVE default) (from 24.6.6).
Disable "Fast reboot" of kexec.
24.6.6
del...
24.6.5
回退 apollolake, broadwell, broadwellnk 架构 pci stubs 的修改 (from 24.6.4).
修复 个别环境的启动超时时的异常中断.
修复 SA6400 i915 报错 "GUC: CT: Failed to process CT message" (from 24.5.2) (test).
添加 开启 “启用 Spectre 和 Meltdown 防护, 以缓解 speculative execution 漏洞” 的方法 (cmdline).
其他.
reback pci stubs for apollolake, broadwell, broadwellnk architectures (from 24.6.4).
Fix the startup timeout exception interrupt in some environments.
Fix the SA6400 i915 error "GUC: CT: Failed to process CT message" (from 24.5.2) (test).
Add "Enable Spectre and Meltdown protection to mitigate speculative execution vulnerabilities" method (cmdline).
Others.
24.6.4
修改 apollolake, broadwell, broadwellnk 架构的 pci stubs.
优化 RR 系统的驱动和程序.
添加 forcedeth, sfc, tehuti, via, jme 网卡驱动.
修改 acpid 插件.
其他.
Modify pci stubs for apollolake, broadwell, broadwellnk architectures.
Optimize RR system drivers and programs.
Add forcedeth, sfc, tehuti, via, jme network card drivers.
Modify acpid addon.
Others.
24.6.3
修复 DNS 失败导致网络不可用的问题.
修复 German 翻译, Thanks @TimKraemer.
更新 r8152 to v2.18.1.
更新 mpt3sas to 50.00.00.00
Fix DNS failure causes network unavailable.
Fix German translation, Thanks @TimKraemer.
Update r8152 to v2.18.1.
Update mpt3sas to 50.00.00.00.
24.6.2
del ...
24.6.1
添加 ova 镜像支持.
修复 e1000e 对 I-219V 的支持(未测试).
其他.
Add ova image support.
Fix e1000e support for I-219V (not tested).
Other. 頭香 謝謝分享 学习学习学习学习 謝謝分享 謝謝分享 更新了？
謝謝分享 收藏一个，，先。。。。 支持支持，正要更新 感谢分享{:7_208:}{:7_204:} 感谢分享
感谢分享！！ 不错，更新一下看看 頭香 謝謝分享頭香 謝謝分享 感谢分享 楼主发贴辛苦了，谢谢楼主分享！
感谢分享！ 谢谢分享！ 支持下，紧跟更新步伐 更新好快。