3617DSM6.2.2update4直通Intel网卡在esxi下只有30-40M的速度
esxi6.7u3下装的3617DSM6.2.2,直通82575的网卡后,速度只有30-40M上不了千兆速率。大家有什么解决的办法吗?进去看网卡信息也支持全千兆。root@NAS:~# ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: Symmetric
Supports auto-negotiation: Yes
Advertised link modes:10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: on (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
啥配置的机器? 之前我也用ESXI,后面系统崩溃,直接物理机了,物理机稳妥啊 genics 发表于 2019-12-26 12:56
啥配置的机器?
i7品牌主机。 冰锋天下1 发表于 2019-12-26 13:22
之前我也用ESXI,后面系统崩溃,直接物理机了,物理机稳妥啊
物理机已经有一台蜗牛了,单台开着,3块3.5.功耗45W,觉得没必要。准备虚拟机一台,然后需要的时候再同步到物理机上。 硬盘直通了吗? toseeme 发表于 2019-12-29 19:14
i7品牌主机。
确实不正常
页:
[1]