geniusrichter 发表于 2017-11-27 21:38:06

哪些是黑群可用的万兆网卡?求型号

黑裙想上万兆,不知道支持什么型号的网卡,求助老司机!!!

3008086 发表于 2017-11-28 08:30:04

官网有支持的型号,那些型号的网卡绝对稳妥。

20170101 发表于 2017-11-28 10:02:43

同一楼,详见官网

gcafrk 发表于 2017-11-28 11:52:06

############# Included default modules in Jun's Loader #############Updated broadcom tg3, bnx2, bnx2x, cnicUpdated intel e1000e (I219 support)Add/Updated realtek r8168, r8169 and r8101 (r8169 from realtek website no the one inside the kernel tree)
Added below kernel modules:r8101: RTL8100E/RTL8101E/RTL8102E-GR/RTL8103E(L) RTL8102E(L)/RTL8101E/RTL8103T RTL8401/RTL8401P/RTL8105E RTL8402/RTL8106E/RTL8106EUSr8168: RTL8111B/RTL8168B/RTL8111/RTL8168 RTL8111C/RTL8111CP/RTL8111D(L) RTL8168C/RTL8111DP/RTL8111Er8168: RTL8168E/RTL8111F/RTL8411 RTL8111G/RTL8111GUS/RTL8411B(N) RTL8118AS* Note: r8169 from Trantor archive doesn't work with my on-board Realtek RTL8111GR. So I kept the existing which is also much bigger.e1000e: 82573L/82572EI/82571EB/82573E/82573V/82567/82574L/82566MM/82566MCe1000e: 82566DM/82566DC/82563EB/82574IT/82583V/82579LM/82579V/82577LC/82577LMe1000e: 82578DC/82578DM/Gigabit CT Desktop Adapter/PRO/1000 PT/PF/I217-LM/V/I218-V/LM/I219 LM/Vbnx2: Broadcom NetXtremeII BCM5706/BCM5708/5709/5716bnx2x: Broadcom NetXtremeII 10Gb BCM57710/BCM57711/BCM57711E/BCM57712tg3: Broadcom Tigon3 BCM5705/BCM5703/BCM5702/BCM5701/BCM5700/BCM5721/BCM5751/BCM5788/BCM5704/BCM5752/BCM5789tg3 : BCM5723/BCM5761/BCM5787/BCM5755/BCM5722/BCM5754/BCM57781/BCM57785/BCM5718BCM57765/BCM57761tg3: BCM5719/BCM5725/BCM5762/BCM5720/BCM57790/BCM57795/BCM57766/BCM57780* Note: Existing modules updated with version from Trantor archive. I also added missing firmware files.ax88179_178a : ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernetmpt2sas: LSI SAS 6Gb/s Host Adapters SAS2004, SAS2008, SAS2108, SAS2116, SAS2208, SAS2308 and SSS6200* Note: It's already included in existing ramdisk but not loaded. By dmesg it's started correctly.evdev, button: for acpid
* Fixed loading modules after installation step and upgrading from previous ramdisk version* Fixed order of loading kernel modules (cause not loading cnic)--------------------------------------------------------------------------------Recompiled kernel modules:r8169: r8169-6.022.00 sources* Note: Compiled by Trantorigb: igb-5.3.5.4 sourcesixgbe: ixgbe-4.4.6 sources* Note: Compiled from latest sources at intel.commegaraid_sas: megaraid_sas-06.812.07.00 sourcesmpt2sas: mpt2sas-20.00.04.00 sources* Note: Compiled from latest sources at lsi.com/avagotech.com--------------------------------------------------------------------------------Added kernel modules:mpt3sas: mpt3sas-14.00.00.00 sources* Note: Compiled from latest sources at lsi.com/avagotech.comftdi_sio, cp210x, ch341, pl2303* Note: ftdi_sio is compiled by Synology, others are compiled from 7274 kernel sources

wjq_xp 发表于 2017-11-28 15:34:23

有必要吗?千兆还不够?网卡就算你上万兆,路由器,交换机,网线都要换,还有你的硬盘速度能跟上吗?

小试灬 发表于 2017-11-28 17:38:08

牵一发而动全身的设备啊

geniusrichter 发表于 2017-11-28 19:52:23

用SSD网卡就是瓶颈了,我是群晖直连电脑,只要我这个电脑可以10G就OK了,不需要路由交换机配合

zipoff 发表于 2017-11-28 21:17:42

INTEL原厂原装 X520T1或T2和X540T1或T2都可以,价格有点贵。

zipoff 发表于 2017-11-28 21:19:07

geniusrichter 发表于 2017-11-28 19:52
用SSD网卡就是瓶颈了,我是群晖直连电脑,只要我这个电脑可以10G就OK了,不需要路由交换机配合 ...

INTEL原厂原装 X520T1或T2和X540T1或T2都可以,价格有点贵。

geniusrichter 发表于 2017-11-29 22:39:50

入了Mellanox MNPA19-XTR,实测黑裙和win10都可以免驱,暂时一切正常

bolk001 发表于 2017-12-4 10:35:00

本帖最后由 bolk001 于 2017-12-4 12:34 编辑

OM5光纤跳线,支持的带宽更高,距离也够远。OM3光纤跳线。这里的具体区别就不是太懂了。
页: [1]
查看完整版本: 哪些是黑群可用的万兆网卡?求型号