LS-WVL 已经成功运行了openwrt ，LS-WXL也不远了
原作者：http://www.right.com.cn/forum/thread-139269-1-1.html本人按照相同方法，LS-WXL也可以成功启动，内存空闲100M 但是webgui 无法访问，也无法ping 通 192.168.1.1，求高手帮忙
原作者LS-WVL加TTL：http://www.right.com.cn/forum/thread-135890-1-1.html
TTL:
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Linux version 3.3.8 (question@sina.com) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #31 Fri Jan 24 15:38:43 CST 2014
[ 0.000000] CPU: Feroceon 88FR131 revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Buffalo LS-WVL/E-AP NAS
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 32512
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,12M panic=5 BOOTVER=0.21 mtdparts=nand_mtd:0x1000000(boot),0xe800000(rootfs),0x800000(reserve)
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 113512k/113512k available, 17560k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector: 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap: 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem: 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 (16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0396000 (3640 kB)
[ 0.000000] .init : 0xc0396000 - 0xc03b7000 ( 132 kB)
[ 0.000000] .data : 0xc03b8000 - 0xc03d66c0 ( 122 kB)
[ 0.000000] .bss : 0xc03d66e4 - 0xc0401158 ( 171 kB)
[ 0.000000] NR_IRQS:114
[ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
[ 0.000000] gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
[ 0.000000] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 25769ms
[ 0.585133] Calibrating delay loop... 597.60 BogoMIPS (lpj=2988032)
[ 0.645030] pid_max: default: 32768 minimum: 301
[ 0.645295] Mount-cache hash table entries: 512
[ 0.645774] CPU: Testing write buffer coherency: ok
[ 0.646135] Setting up static identity map for 0x31f950 - 0x31f98c
[ 0.648935] NET: Registered protocol family 16
[ 0.652013] Kirkwood: MV88F6281-A1, TCLK=166666667.
[ 0.652040] Feroceon L2: Enabling L2
[ 0.652097] Feroceon L2: Cache support initialised.
[ 0.655990] lswvl_init: finished
[ 0.669164] bio: create slab <bio-0> at 0
[ 0.670728] SCSI subsystem initialized
[ 0.672292] usbcore: registered new interface driver usbfs
[ 0.672534] usbcore: registered new interface driver hub
[ 0.672794] usbcore: registered new device driver usb
[ 0.674682] Switching to clocksource orion_clocksource
[ 0.677449] NET: Registered protocol family 2
[ 0.677677] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.678069] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.678213] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.678309] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.678326] TCP reno registered
[ 0.678345] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.678382] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.678680] NET: Registered protocol family 1
[ 0.678978] Unpacking initramfs...
[ 0.679001] Initramfs unpacking failed: compression method gzip not configured
[ 0.725834] Freeing initrd memory: 12288K
[ 0.728307] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.728334] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.728957] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, debug enabled
[ 0.729870] SGI XFS Quota Management subsystem
[ 0.729919] msgmni has been set to 245
[ 0.729969] io scheduler noop registered
[ 0.729985] io scheduler deadline registered (default)
[ 0.849266] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.870602] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 1.243809] console enabled
[ 1.268061] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
[ 1.276466] sata_mv sata_mv.0: slots 32 ports 2
[ 1.283923] scsi0 : sata_mv
[ 1.287511] scsi1 : sata_mv
[ 1.290860] ata1: SATA max UDMA/133 irq 21
[ 1.294981] ata2: SATA max UDMA/133 irq 21
[ 1.301451] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 1.308499] mv643xx_eth smi: probed
[ 1.313457] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address 00:50:43:4b:27:29
[ 1.322469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.329077] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 1.334393] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 1.364752] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 1.384733] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 1.391656] hub 1-0:1.0: USB hub found
[ 1.395444] hub 1-0:1.0: 1 port detected
[ 1.400018] Initializing USB Mass Storage driver...
[ 1.405200] usbcore: registered new interface driver usb-storage
[ 1.411189] USB Mass Storage support registered.
[ 1.416270] cpuidle: using governor ladder
[ 1.423103] TCP cubic registered
[ 1.426362] NET: Registered protocol family 17
[ 1.431188] 8021q: 802.1Q VLAN Support v1.8
[ 1.435633] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.804750] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl F300)
[ 1.844786] ata1.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
[ 1.850782] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.914793] ata1.00: configured for UDMA/133
[ 1.919487] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM320JI2SS0 PQ: 0 ANSI: 5
[ 1.928837] sd 0:0:0:0: 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.937003] sd 0:0:0:0: Write Protect is off
[ 1.941939] sd 0:0:0:0: Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.048004]sda: sda1 sda2
[ 2.052668] sd 0:0:0:0: Attached SCSI disk
[ 2.284747] ata2: SATA link down (SStatus 0 SControl F300)
[ 2.321780] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (40)
[ 2.330914] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (40)
[ 2.344950] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended
[ 2.353555] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
[ 2.360641] VFS: Mounted root (ext4 filesystem) on device 8:2.
[ 2.367022] Freeing init memory: 132K
- preinit -
Press the key and hit to enter failsafe mode
- regular preinit -
[ 6.964284] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 7.159550] Uniform Multi-Platform E-IDE driver
[ 7.187419] libata: exports duplicate symbol ata_dev_printk (owned by kernel)
[ 7.221211] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 7.229429] kmem_cache_create: duplicate cache xfs_ioend
[ 7.234736] Backtrace:
[ 7.237188] Function entered at [<c000bccc>] from [<c031b6ac>]
[ 7.243002]r6:c788d240 r5:c7a40000 r4:c7a40000 r3:c03c1500
[ 7.248695] Function entered at [<c031b694>] from [<c00730b8>]
[ 7.254509] Function entered at [<c0072f6c>] from [<bf094128>]
[ 7.260339] Function entered at [<bf0940fc>] from [<bf094578>]
[ 7.266169]r5:bf0926a0 r4:c7a40000
[ 7.269751] Function entered at [<bf09455c>] from [<c0008528>]
[ 7.275579]r4:c7a40000 r3:00000000
[ 7.279159] Function entered at [<c0008484>] from [<c0043570>]
[ 7.284989]r8:c7a958a8 r7:bf0926e8 r6:bf0926a0 r5:bf0926a0 r4:bf092798
[ 7.291705] Function entered at [<c0042698>] from [<c0009060>]
[ 7.305827] ide-gd driver 1.18
[ 7.317242] sata_mv: module is already loaded
[ 7.328986] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 7.343248] uhci_hcd: USB Universal Host Controller Interface driver
- init -
Please press Enter to activate this console. 15 (Min/Max 5/39)
[ 28.811173] exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
[ 28.863023] libata: exports duplicate symbol ata_dev_printk (owned by kernel)
[ 28.917944] aoe: AoE v47 initialised.
[ 28.973647] NTFS driver 2.1.30 .
[ 29.023631] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 29.031864] kmem_cache_create: duplicate cache xfs_ioend
[ 29.037172] Backtrace:
[ 29.039624] Function entered at [<c000bccc>] from [<c031b6ac>]
[ 29.045454]r6:c788d240 r5:c7ad6000 r4:c7ad6000 r3:c03c1500
[ 29.051129] Function entered at [<c031b694>] from [<c00730b8>]
[ 29.056961] Function entered at [<c0072f6c>] from [<bf1fd128>]
[ 29.062776] Function entered at [<bf1fd0fc>] from [<bf1fd578>]
[ 29.068606]r5:bf1fb6a0 r4:c7ad6000
[ 29.072185] Function entered at [<bf1fd55c>] from [<c0008528>]
[ 29.078022]r4:c7ad6000 r3:00000000
[ 29.081603] Function entered at [<c0008484>] from [<c0043570>]
[ 29.087433]r8:c7aa9aa8 r7:bf1fb6e8 r6:bf1fb6a0 r5:bf1fb6a0 r4:bf1fb798
[ 29.094149] Function entered at [<c0042698>] from [<c0009060>]
[ 29.144520] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 29.251504] sata_mv: module is already loaded
[ 29.270274] nf_conntrack version 0.5.0 (1967 buckets, 7868 max)
[ 29.466136] usbcore: registered new interface driver cdc_acm
[ 29.471784] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 29.490905] usbcore: registered new interface driver ums-alauda
[ 29.507631] usbcore: registered new interface driver ums-cypress
[ 29.524508] usbcore: registered new interface driver ums-datafab
[ 29.541279] usbcore: registered new interface driver ums-freecom
[ 29.558234] usbcore: registered new interface driver ums-isd200
[ 29.574932] usbcore: registered new interface driver ums-jumpshot
[ 29.591710] usbcore: registered new interface driver ums-karma
[ 29.608638] usbcore: registered new interface driver ums-sddr09
[ 29.625461] usbcore: registered new interface driver ums-sddr55
[ 29.642486] usbcore: registered new interface driver ums-usbat
[ 29.677688] usbcore: registered new interface driver usbhid
[ 29.683247] usbhid: USB HID core driver
[ 29.702621] fuse init (API version 7.18)
[ 32.118725] mv643xx_eth_port mv643xx_eth_port.0: eth0: link up, 10 Mb/s, half duplex, flow control disabled
[ 32.129395] device eth0 entered promiscuous mode
[ 32.134479] br-lan: port 1(eth0) entered forwarding state
[ 32.139920] br-lan: port 1(eth0) entered forwarding state
[ 34.134729] br-lan: port 1(eth0) entered forwarding state
15 (Min/Max 5/39)
BusyBox v1.19.4 (2013-12-18 06:08:50 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______________________________________________________________
| ____ _ ____ |
| |_ \ __ _ _ __ __| | ____ __ __ _| __ )_______ |
| | |_) / _` | '_ \ / _` |/ _ \| '__/ _` |_ \ / _ \ \/ / |
| |__/ (_| | | | | (_| | (_) | | | (_| | |_) | (_) >< |
| |_| \__,_|_| |_|\__,_|\___/|_|\__,_|____/ \___/_/\_\ |
| |
| DreamBox Team |
| Copyright 2011-2013 |
| https://dev.openwrt.org.cn |
|______________________________________________________________|
Base on OpenWrt (v1.0, r737)
root@LS-WVL:/# ifconfig
br-lan Link encap:EthernetHWaddr 00:50:43:4B:27:29
inet addr:192.168.1.1Bcast:192.168.1.255Mask:255.255.255.0
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B)TX bytes:6820 (6.6 KiB)
eth0 Link encap:EthernetHWaddr 00:50:43:4B:27:29
UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B)TX bytes:6852 (6.6 KiB)
Interrupt:11
lo Link encapundefinedocal Loopback
inet addr:127.0.0.1Mask:255.0.0.0
UP LOOPBACK RUNNINGMTU:16436Metric:1
RX packets:769 errors:0 dropped:0 overruns:0 frame:0
TX packets:769 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:52242 (51.0 KiB)TX bytes:52242 (51.0 KiB)
root@LS-WVL:/# 15 (Min/Max 5/39)
无人感兴趣啊。 顶起！
好东西。。 很有趣的东西，希望有进一步的成果啊。
页:
[1]